Veco CLIMMA VEGA MK II, Инструкция по установке, использованию и программированию

Страница: 17 / 25

8 - HIDDEN PARAMETERS
Pag. 14
Parameter C60 (Default=30 minutes)
It can be changed from 30 to 60 minutes.
Functioning length in Dehumidify Mode
For example:
Functioning=30 minutes every 6 hours
How to modify the parameter C60
When the panel is off
Press the S the On/Off button (for 3 seconds) > [PASS] > Press the S button
> [0] > Press the Arrow Up or the Arrow Down button to display the number 123 >
press the S button > [C10] > Press the Arrow Up or the Arrow Down button to display
the parameter [C60] > Press the S button > Press the Arrow Up or the Arrow down but-
ton to select the new desired value < Press the S button to confirm
Parameter tSt-TEST
It is used to test all the functioning modes.
Different components and functioning modes are tested in order independently from
the temperature felt by the thermostat.
Test with a Fan Coil unit
Test ALL [ALL]
When you set up the test ALL, you set up the tests sequence t1-t2-t3-t4-t5.
Test N° 1 [t1]
It opens the water valve (for 5 minutes). The message [bLE] (bleeding) appears on the
display.
Test N° 2 [t2]
It sets up the fan and commutes the four speeds to a sequence (20 seconds for each
one). The abbreviations [F1],[F2],[F3],F4] appear on the display.
Test N° 3 [t3]
It opens the water valve for 5 minutes (fan at medium speed)+1 minute closing.The
message [HYd] appears on the display.
Test N° 4 [t4]
It switches on the resistance for 5 minutes (fan at medium speed). The message [Elt]
appears on the display.
Test N° 5 [t5]
It switches on the warning lights and all the display segments.