Veco CLIMMA VEGA MK II, Инструкция по установке, использованию и программированию

Страница: 13 / 25

5 - FAN MODES
Pag. 10
Parameter CO4 (Default=d)
This parameter controls the fan automatic logic. The "d" value decreases the fan
speed until more or less the Set Point. The "U" value increases the speed until more
or less the Set Point.
How to set the parameter CO4
When the panel is off
Press the S button (for 3 seconds) > [CO1] > Press the Arrow Down button to select
[CO4] > Press the S button > Press the Arrow Up or the Arrow Down button to select
the desired value [d] o [U] > Press the S button
Parameter CO5 (Default=ON)
This parameter controls (if possible) the fan functioning when the Set Point is rea-
ched.
With CO5=ON: the fan continues to work
With CO5=OFF: the fan stops
How to set the parameter CO5 (Default=d)
When the panel is off
Press the S button (for 3 seconds) > [CO1] > Press the arrow Down to select [CO5}
> Press the S button > Press the Arrow Up or the Arrow Down button to select the
desired value [ON] or [OFF] > Press the S button
Parameter CO3 (Default=C)
Temperature measure in C° or F°.
How to set the parameter CO3
When the panel is off
Press the S button (for 3 seconds) > [CO1] > Press the Arrow Down button to select
[CO3] > Press the S button > Press the Arrow Up or the arrow Down button to select
the desired value [C] or [F] > Press the S button