Tighten clamping screw
Insert cable
Cable clamp at lever
side. (move
LOC
)
Cable clamp at dropper
post side
Cable installation
Remove cable and
existing cable
return spring
Install new cable return
spring and cable into
cable housing
Pay attention to the
steering angle
Remove remote cable
from dropper post
Loosen cable clamp at universal
remote and remove lever
Loosen cable clamp
Replace cable return spring (
move
LOC dropper post only)
Allen key 2.5mm
Allen key 1.5mm
Allen key 1.5mm
Possible Installation
options
Advice
:
Cut the cable
at nipple side
to the desired
length in that
way, that the
soldered end of
the cable fir exactly
into the trigger paddle.
