ROBUST - V
7
Dimensions & assembly
Fixed installation
The fan is delivered according to pic. B.
Mount the fan via the keyholes, secure by tightening the two lower screws and then the other screws, check that
the heater is securely fixed in position. See my dimensions fig 1.
A circuit breaker with a minimum 3-mm breaker gap must be fitted on a fixed installation heater.
Check the heater’s data plate and wiring plan in the cover, to ensure correct installation. Installation must be done
by a qualified installer in compliance with current regulations.
Portable mode
1. Undo the two screws in the bracket and holder, see fig 2.
2. Then undo screws in the bracket on the side of the heater, see fig 3.
3. Remove screws and associated plate from motor, see fig 4.
4. Remove holder between motor and brackets, it is not needed for portable mode.
5. Screw the three screws back in the motor. Do not forget the plates.
6. Mount brackets on the fan, see pic. C.
Portable use
Fixed installation
Fig 1
Pic. B
Pic. C
Fig 2
Fig 4
Fig 3
Содержание ROBUST V Series
Страница 27: ...ROBUST V 27 safe areas 3 EMC Veritas IP44 RTC 0 35 1 2 1 2 3 1 1 0 35 4 1 A B C D E F 4 3 1 2...
Страница 28: ...ROBUST V 28 1 3 1 2 2 3 3 4 4 5 6 C 1 B C 2 4 3 300 300 500...
Страница 30: ...ROBUST V 30...
Страница 31: ...ROBUST V 31...
