VDO TV 5100, Руководство пользователя

Страница: 17 / 36

INSTALLATION INSTRUCTIONS
17
English
IMPORTANT INFORMATION
A
Only trained specialists may install the system.
A
Observe the automotive industry quality standards.
A
Fire hazard. During drilling, be careful not to damage hidden cable harnesses, the fuel
tank and fuel lines.
A
Never drill into supporting or safety-relevant chassis parts.
It is essential to observe the following when installing components in the
passenger compartment:
A
Ensure that the driver has a clear all-round view.
A
Increased risk of injury in the event of an accident. Do not install components in the
inflation range of the airbag or in areas where the head or knees may knock against them.
A
Install only in vehicles with a 12 V on-board voltage and the negative pole on the chassis.
Risk of malfunctions, damage and vehicle fire if installed in unsuitable vehicles.
A
Do not damage cables of the safety systems (airbag etc.).
(Lines are normally specially marked, e.g. by labels.)
A
Do not use inspection lamps to test the voltage, since excessively high currents can dam-
age / destroy electronic components.
A
Do not use any pinch or cut connectors. Solder all cable connections. Insulate all solder
points with shrinkable hose or insulating tape.
A
If there are earth connections on the chassis, insert toothed washers. Remove paint and
dirt first, if necessary.
TV5100-en.book Seite 17 Dienstag, 28. August 2001 2:41 14