Notes:
In many countries, flat batteries may not be
disposed of together with the normal domestic
rubbish. Please determine how to dispose of
flat batteries in accordance with local regula-
tions.
Use only leak-proof batteries. Battery leakage
can cause damage to the remote control or
to your vehicle.
Never expose the remote control to direct
sunlight or extreme heat. The batteries dis-
charge at high temperatures and there is a
risk of leakage.
■
RC 5400
1
VOICE/ALT-R
:
Press briefly
: Calls up the
current audible guidance message.
Press and hold
: Switches to “Alternative
Route” menu.
2
4
,
6
,
8
,
2
: Cursor buttons, move the
cursor in the menus.
3
OK
: Confirms a selection.
4
ESC
:
Press briefly
: Jumps back to the
previous menu.
Press and hold
: Jumps directly to the
Start menu.
5
NAVIGATION
:
Press briefly
: Switches the
display type of the guidance screen.
Press and hold
: Moves directly to the
Start menu.
6
ENTERTAIN
:
Press briefly
: Calls up the
previously used entertainment source.
7
FAVOURITE
: This button is freely pro-
grammable to provide direct access to
selected functions. Detailed information
on programming this button can be
found in the “Settings” section of the
PDF version of the operating instructions.
8
W
,
V
: Volume setting.
9
HOME
:
Press briefly
: Adopts the address
stored under “Home” for directional
guidance.
Press and hold
: Adopts the address
stored under “Work” for directional
guidance.
The buttons
y
,
z
and
x
have no func-
tion in relation to the navigation system.
Switching on/off
The navigation computer is switched on and
off together with the ignition.
☞
Switch on the ignition.
✔
As soon as the navigation system is op-
erational, an instruction about using the
system appears in the display.
☞
Read this instruction and confirm it by
pressing the
OK
button on the remote
control.
✔
The Start menu appears.
■
Stand-by mode
You can switch the system into stand-by
mode as follows:
☞
Select “Stand-by” in the Start menu.
✔
The display and the audible guidance
messages are deactivated.
☞
Press one of the cursor buttons
4
,
6
,
8
,
2
or the
OK
button on the remote
control to exit stand-by mode again.
If the navigation system is switched off in
stand-by mode, it restarts in stand-by mode
when the ignition is switched on again.
8
OPERATION
SETUP
INSTALLATION
CONTENTS
