Initial operation and system check
1. Reconnect the battery.
2. Restore perfect functioning of the electrical system (clock, trip computer, alarm system, air-
bag, immobiliser, radio coding etc.).
3. Switch on the ignition.
4. Switch “Stand-by” switch to “On” position. The monitor is switched on. If a navigation
computer is connected, ensure that this is not in stand-by mode.
5. Engage reverse gear. The reversing camera image must appear on the monitor with the
parking brake released as well as applied.
6. Select neutral or, for automatic transmissions, position “P”. If a navigation system is
connected, the navigation image must now appear on the monitor. Ensure that the
navigation system is not in stand-by mode.
7. Navigation system and external video source connected:
Apply the parking brake. Switch on external video source. In the Start menu of the
navigation system, select the option “Stand-by”. The image of the external video source
must appear on the monitor. The sound of the video source must be heard from the
monitor loudspeaker.
8. No navigation system connected:
Apply the parking brake. Switch on external video source. The image and sound of the
external video source must be produced by the monitor.
Volume adaptation
Volume adaptation between audio / video input and the navigation system can be
performed via the MI 2100 volume control, using a screwdriver.
Checking the vehicle functions
A
Check the safety-relevant vehicle functions only when the car is stationary, or moving at low
speed. Only perform the check in an open area.
Brake system, alarm system, lighting system, immobiliser, speedometer, trip computer, radio
(coding) and hi-fi system, clock.
Hotline
If you have any questions about VDO Dayton Multimedia, a hotline is available in many
countries: The phone number for your country can be found on a separate loose leaf.
INSTALLATION INSTRUCTIONS
English
9
