![background image](http://html1.mh-extra.com/html/vdo/mi-2100/mi-2100_owners-manual_3948900004.webp)
Notes on operating instructions
The following reading aids are used to simplify these operating instructions:
☞
requests you to perform an action.
❏
identifies a list.
A
Safety instructions and warnings contain important information for the safe use of the unit.
Failure to observe this information may result in a risk of damage or injury. Therefore, please ob-
serve this information with particular care.
WARNING:
Important information for safe operation
A
For safety reasons, the driver should not watch television or operate a video source (DVD
player, TV tuner, etc.) when driving. Please note that it is illegal in certain countries to watch or
operate the television when driving.
A
When setting the volume, please make sure that traffic noises (horns, sirens, emergency
vehicles, etc.) are still audible.
Features
❏
Automatic switching of video sources.
❏
Audio / video input (RCA/Cinch).
❏
Volume adaptation of connected video source.
Function
The MI 2100 multimedia interface enables building of a multimedia system, with little effort.
For this purpose, any video source (e.g. VDO Dayton DVD player DV 6100), a VDO Dayton
reversing camera as well as a navigation computer can be connected to the MI 2100.
Switching of the relevant video source (AV, reversing camera or navigation system) is per-
formed automatically by the MI 2100, depending upon the traffic situation and configura-
tion of the multimedia system.
Monitor stand-by
The MI 2100 is switched on and off together with the ignition. In addition, the connected
monitor can be activated or deactivated via the “Stand-by - On” switch. With the switch in
the “Stand-by” position, the monitor is always in stand-by mode.
Priority configuration
For the fully equipped multimedia system (MI 2100 + reversing navigation system
+ external video source), the following priorities are defined for switching the sources to the
monitor:
1. Reverse gear engaged –> reversing camera image appears on the monitor.
2. Reverse gear not engaged –> navigation system image appears on the monitor.
3. Reverse gear not engaged, parking brake applied –> external video source (if switched on)
can be selected via the “Stand-by” option in the Start menu of the navigation system.
GENERAL INFORMATION
5
English