I
• Edi
/200
9
10
4 Test procedure for the KITAS
Testing Instructions for CTC II
4.1 Testing the KITAS
4
Test procedure for the KITAS
When the CTC II is connected to the power supply, it starts
automatically, displaying the basic menu.
4.1
Testing the KITAS
The CTC II is now connected to the KITAS.
The CTC II is connected to a power supply.
◄
Condition
1 Select “KITAS > Sensor test > Pulse test” and confirm.
2 To simulate sensor pulses:
a) With KITAS connected:
–
Drive the vehicle smoothly and steadily (measurement on
the road)
or
–
rotate the wheels of the vehicle evenly (rolling road).
b) KITAS not connected - standard version:
–
Rotate the axle of the KITAS, e. g. with a screwdriver.
c) KITAS not connected - integrated version:
–
Pass a metal object past the KITAS axle.
The counted pulses from the KITAS will be displayed
3 Press
to finish the pulse-count procedure and continue with
the sender check.