Configuring the CTC II
Connecting the CTC II
31
• Edition 01/2
009
Configuring communication via a trailing cable
To program communication in the CTC II via a trailing cable:
You have replaced the Bluetooth module with the trailing cable interface
connection; see the
Chapter entitled “Connection J13 – Trailing cable
on
Page 16
.
The CTC II and the Roller Interface Module are connected via Bluetooth.
◄
Condition
,
1
Open the “Communication” menu.
,
2
Open the “Connection” menu.
The saved value is shown in the
Actual
display.
/
,
3
Change the connection to “serial”.
When programming has been completed, the newly entered value will be
shown in the
Actual
display.
4
Return to the “Communication” menu.