VDO CD 4402 -, Руководство пользователя

Страница: 14 / 38

9
3- Use the keys, to select ON (default va-
lue) or OFF.
4- Press ESC to enter the value.
Note
: The set will turn OFF after 1 hour or if
the battery voltage becomes < 9 volts.
Setting an Auxiliary Equipment
This function enables or disables an auxiliary
device connected to the set.
1- Long press MUTE.
2- Select AUXILIARY using the
keys.
3- Use the keys, to select ON (default va-
lue) or OFF.
4- Press ESC to enter the value.
Switching the Warning LED
This function enables/disables the blinking
LED (contact Off or remove front).
1- Long press MUTE.
2- Select WARN LED using the
keys.
3- Use the keys, to select ON (default
value) or OFF.
4- Press ESC to enter the value.
Setting the Chimes Audio Level
This function allows you to set the chimes
audio level.
1- Long press MUTE.
2- Select CHIMES LVL with the
keys.
3- Use the keys, to select a value between
1 and 5 (2=default value).
4- Press ESC to enter the value.
Note : Chimes bleeps are priority audible
effects even in “mute” state.
Selecting Chimes
This function allows you to select pre-recor-
ded chimes for audible system feedback.
1- Long press MUTE.
2- Select CHIMES SET with the
keys.
3- Short press ENTER to get the chimes menu
4- Use the
keys, to select a chime type:
keypress, confirmation, announcement, war-
ning, errors, welcome, by-by or car intrusion.
5- Use the keys to select a bleep which
will be associated to the previously selec-
ted chime type.
6- Press ESC to enter the value.
Setting the Message Audio Level
This function allows you to adapt the
messages audio level.
1- Long press MUTE.
2- Select TA VOLUME with the
keys.
3- Use the keys, to select a value.
4- Press ESC to enter the value.
Setting a Phone Equipment
This function enables/disables the phone
detection for the car radio.
1- Long press MUTE.
2- Select PHONE with the
keys.
3- Use the keys, to select NO (default
value), Mute or IN.
4- Press ESC to enter the value.
Note : Set to IN if the Tel audio is connected to
the Tel IN wire. In same case, you need to set
the phone detection level (see dealer).
Setting the Phone Detection Level
This function allows to configure the phone
message detection level (Tel mute wire).
1- Long press MUTE.
2- Select PHONE LVL with the
keys.
3- Use the keys, to select LOW (default
value) or HIGH.
4- Press ESC to enter the value.
Note
: You need to select the value according to the
connected equipment (telephone, loudspeakers).
Setting the Phone Volume
This source independent function adjusts the
phone level between its min. and max. value
(-30 to +30).
1- Short press MUTE.
2- Select PHONE VOL with the
keys.
3- Use the keys to select a value (0 equal
the default value).
4- Press ESC to enter the value.
En
gl
ish
AN 2001 2L gb.qxd 16/07/01 14:54 Page 9