5
2- Insert antenna connector E in the antenna
socket (good reception is only possible
with a good antenna) : use the antenna
adapter if necessary. Use the J hook on
the back of the set to secure fixing.
3- Insert the power supply connector in
socket A7.
4- Insert the loudspeakers connectors in so-
cket B (B1 to B8).
· (optional) Remove the protective cover
from socket C.
· (optional) Insert the yellow line-out
connector in socket C1.
· (optional) Insert the blue connector for
the CDC or DAB in socket C3.
· (optional) Insert the green connector in
socket C2. The green connector fits
between yellow connector C1 and blue
connector C3. You need at least one of
these connections to keep C2 in place.
Mounting a DIN radio
(See Fig.12)
1- Slide the radio into the metal sleeve until
the springs on either side snap into the
sleeve openings.
2- Reconnect the negative terminal of the
car battery (see Fig.15): the installation is
now complete.
Note
:
The buffer mounting, directly mounted
on the back side allows safety tenure.
Mounting a JIN radio**
(See Fig.13)
1- Remove the frame front of your radio.
2- Insert your radio through the back side of
the dashboard until the brackets on either
side fit with the screw holes..
3- Screw both side of your car radio with the
M5 x 6 mm max. length screws.
4- Mount the frame front.
5- Reconnect the negative terminal of the
car battery (see Fig.15): the installation is
now complete.
Removing the radio
(see Fig.14)
You can unlock the radio using the two left
and right U-brackets provided.
1- Check that the battery is disconnected.
2- Remove the front.
3- Insert each well positioned U-bracket in its
corresponding side socket until they lock.
4- Remove the radio from the metal sleeve.
Warning: When mounting or
removing the radio, handle
carefully the connectors
to avoid damages.
EQUIPMENTS
(see list of accessories at the end)
Replacing the fuse
1- Remove the fuse F from the connector
block at the rear of the radio.
2- Replace it with a new 10A blade-type fuse
Note 11
:
The new fuse must be of same value
and same type, otherwise the set will not be
adequately protected.
Note 22
:
If you do not follow this procedure,
you risk damaging the set which invalidate
the guarantee.
Suppressing Interference
Most modern cars have adequate interfe-
rence suppression. If you experience inter-
ference, consult your garage.
Using Remote Control**
As an accessory, you can use two types of
infrared to remote control your set:
1- Credit Card Format.
2- Steering Wheel.
Installing an external amplifier
You can use the subwoofer output (Con-
nector D2) to connect an external amplifier:
set this equipment in the Sound Init Menu.
!
En
gl
ish
** For this accessory, see your dealer
AN 2001 2L gb.qxd 16/07/01 14:54 Page 5
