background image

1

CPU-unit

SUPPLY-unit

User manual ALFA-45

 and ALFANET-45

Cool/Defrost thermostat
with Fan control.

VDH doc. 053884

Version: v1.3

Datum: 04-04-2011

Software: ALFA 45 F

Doc: Do053884.wpd

Range: -50/+50

C, per 1

C

* Installation.

The 

ALFA(NET)-45

  consist  of  two  parts,  a  Supply-unit  for  rail-mounting  and  a  CPU-unit  for  front-

mounting (with operation buttons, display). These two units are connected with each other by a cable
with 8-pole data-connector.
On the front of the 

ALFA-45 Modulbox

 

supply-unit

 is shown how sensors and power supply are to

be connected.
After connecting the 

ALFA(NET)-45

 to the power supply, a self test is started. As this test has finished

the measured temperature of the product-sensor appears in the display. 
The Supply-unit has three relay outputs, one for the compressor, one for the fan and one for defrost.
The compressor-relay and the defrost-relay got there own led-indication in the display.
And the 

ALFANET -45

 is by use of the 

ALFANET PC-INTERFACE

 controllable on the PC.

* Control.

The 

ALFA(NET)-45

 thermostat can be controlled by three pushbuttons on the front. These keys are:

 

SET

- view / change of settings.

 

UP

- increase of settings.

 DOWN

- decrease of settings.

Содержание ALFA-45









Отзывы: