8
Control Panel Operation
BUTTON
ACTION and INDICATION
CONTROL PANEL
ON
OFF
1.
Press ON (l)
. Power turns on. All functions are enabled.
2.
Press OFF (O)
. Power, flame effect, and all functions
turn off.
POWER
1.
Press once
. Flame effect and indicator turn on.
2.
Press again
. Power and all functions turn off.
+
TIMER
-
1.
Press +
. ½ h light turns on. Timer is set to ½ hour.
2.
Press again
. 1h light turns on. Timer is set to 1 hour.
3.
Press until desired setting is reached
. Timer setting
increases by ½ hour up to 7½ h.
Examples:
3
hours =
2h
+
1h
;
7½
hours =
4h
+
2h
+
1h
+
½h
.
4.
Press - .
Timer decreases by ½ hour until desired setting
is reached, or until timer turns off.
+
FLAME
-
1.
Press +
. Flame effect gets brighter. Press again until
desired setting is reached.
2.
Press -
. Flame effect gets dimmer. Press again until
desired setting is reached.
HEATER
1.
Press once
. Small indicator lights up. Fan blows cool
air. 750W heater turns on and blows warm air.
2.
Press again
. Large indicator
lights up. 1500W heater
turns on and blows hot air.
3.
Press again.
Heaters turn off. The fan blows cool air to
allow heater to cool down, then turns off.
THERMOSTAT SETTING: Heater must be on for
thermostat settings to work.
Turn the knob to set the
temperature of the heater ranging from about 48
°
F (9
°
C)
to about 93
°
F (34
°
C).
Settings will vary with room size, insulation, etc.
The thermostat will turn the heater on and off to maintain
the set temperature.
\
NOTICE
When the heater is first turned on, a slight odor may be present. This is normal and
should not occur again unless the heater is not used for a long period of time.
NOTICE
To improve operation,
aim
the remote control at the front of the fireplace.
DO NOT
press the buttons too quickly
. Give the unit time to respond to each command.
