VCS VIP 1000, Руководство пользователя

Страница: 54 / 118

Configuring the Transmitter Chapter 6
54 VIP 10 / VIP 1000
Idle state:
Select Open if the relay is to operate as a normally open contact or Closed if it
is to operate as a normally closed contact.
Operating mode:
Select an operating mode for the relay.
If, for example, a light switched on by an alarm is to remain lit when the alarm has
ended, select
Bistable . If an audible signal activated by an alarm is to sound for
a period of ten seconds for example, select 10 s .
Relay follows:
Select a particular event to trigger the relay. The following events can activate the
relay:
]
Off
No relay triggering by events
]
Connection
Triggering whenever a connection is established
]
Video alarm
Triggering caused by loss of the video signal
]
Motion alarm
Triggering by the motion alarm
]
Local input 1
Triggering by the alarm input 1
]
Remote input 1
Triggering by a relay contact at the target location (only when a connection is
established)
]
Unified picture
Triggering caused by a lack of contrast in the picture
Relay name:
A name can be assigned to the relay in this field. The name will be shown on the
button under
Trigger relay . The Livepage can also be configured to display the
name next to the relay icon.