VCS VideoJet 10, Руководство пользователя

Страница: 18 / 70

Installation
20
VideoJet 10
Connections
Camera/Monitor Depending on the device model used, you can connect a video
source (transmitter) or a monitor (receiver). All cameras and video
sources generating a standard PAL or NTSC signal and all monitors
suitable for standard PAL or NTSC video signals can be used for
this purpose.
"
Connect the video monitor using video cable (75 Ohm, BNC con-
nector) to the BNC socket
Video Out of a transmitter.
or
"
Connect the camera or other video source using video cable
(75 Ohm, BNC connector) to the BNC socket
Video In of a receiver.
"
Set the slide switch 75
Ω
on the front of the transmitter to
•
to ter-
minate the video input when the video signal is not lopped through.
Network The VideoJet 10 can be connected to a 10/100 Base-T network
either directly or via a hub. For this purpose use standard UTP
Cat 5 cable with RJ45 connectors.
"
Connect the network cable to the socket Ethernet.
Alarm input/
output The alarm input is provided for switching an external alarm gener-
ator, e.g. a door contact or sensor. Using the appropriate configura-
tion an alarm generator, for example, can activate the automatic
connection setup between the VideoJet 10 and a remote location.
A voltage free closing contact or switch can be used as activator.
Note
Where possible, a switch with minimum contact bounce should be
used as activator.