
7 MultiPoint Conferencing - HD3000’s Embedded MCU
76
VCON HD3000 User’s Guide
At the same time that it broadcasts a video stream, an HD3000 may broadcast a
data stream (such as a PowerPoint® presentation) to the other participants in a
conference (using VCON’s HD DualStream™). Any conferencing system
supporting HD DualStream can see both streams. Systems that do not support dual
stream display only the data stream.
At the same time that an MCU call is taking place, the HD3000 can transmit
multicast and unicast streaming media, using HD Simulcast™, to any end point
running VCON’s Broadcast Viewer or the HD Remote Web Management’s viewer.
7.1
Inviting Additional Contacts to a Multipoint
Conference
Using the embedded MCU, you can join up to three additional participants by both
dialing out or accepting incoming calls.
The multipoint conference appear on the screens of all participants in Voice-
activated Switching.
³
To invite an additional participant to a multipoint conference
1. While you’re in one call, dial another contact through either the Manual
Dialer or the Phone Book.
-or-
If someone calls the HD3000, accept the call.
³
To disconnect someone from a multipoint conference
1. Press <Hang up>. A list of participants appears.
2. Select the name of the person you want to disconnect and press <OK>.
Select the person
to disconnect and
press <OK>.
Содержание HD3000
