VCON HD3000, Руководство пользователя, Страница: 67 / 164

Chapter 5 Network Configuration
VCON HD3000 User’s Guide 55
5.2 Testing Network Configuration
After you configure the Set Network dialogs and restart HD3000, you can check
that the changes that you made were applied.
³
To check network configuration
T
Check that the IP Address displayed is the one that you set or received for
the system.
T
Check if the system is logged into an MXM or registered with a
Gatekeeper, depending on the H.323 options that you chose.
For more troubleshooting details, press the green DIAGNOSE SoftKey
(see “System Diagnostics” on page 129 ).
1. Press <Status>. The Status dialog box appears.
The Status dialog box informs you if your HD3000 is connected
with the local LAN and if the HD3000 is registered with a
Gatekeeper and/or an MXM.
If you selected Gatekeeper and entered the correct IP address in the
Network dialog box’s H.323 tab, the HD3000 should be registered in the
Gatekeeper. If it is not, change the User Number that you entered. You
might have entered a number that is already occupied.