VC20XX Operating Manual
27
6.12 Technical Specifications VC2068/E
Sensor:
1/2" SONY ICX205AL
eff. no. of pixels:
1280(H) x 1024(V)
Pixel size:
4.65(H) x 4.65(V) µm
Chip size:
7.60mm (H) 6.20mm (V)
High-speed shutter:
9,17,26,33, .. µsec, then steps of 69 µsec (full-frame
shutter)
Low-speed shutter:
up to 20 sec. adjustable integration time
Integration:
full-frame
Picture taking:
without delay, program-controlled or triggered externally;
full-frame / 13.75 frames per second (2x binning @
27.5fps)
Clamping:
zero offset digital clamping
A/D conversion:
15.625 MHz / 10 bit,
Input LUT
1024x8 bit (10bit
→
8 bit)
Image display:
black-and-white, Pseudo Color from color lookup table
3x8Bit RGB:live image, still image, graphics
Overlay:
8-bit overlay with LUT, maskable
Processor:
Texas Instruments TMS320C6211 signal processor 150
MHz
RAM:
16 MBytes SDRAM (synchronous dynamic RAM)
Display memory:
16 MBytes SGRAM (synchronous graphics RAM)
Memory capacity:
14 full-size images in format 1280x1024
Flash EPROM:
2 MBytes flash EPROM (nonvolatile memory) for
programs and data,in-system programmable, 16 bit wide
MMC:
Multi-Media Card Adaptor with 16 Mbyte of Card Flash
Memory
Process interface:
4 inputs / 4 outputs, optically decoupled 24 V, outputs
4x400 mA
Ethernet interface:
100 Mbit
Video output:
RGB, 3x75 Ohm, 1 Vpp, SXVGA 1280x1024 output,
HSYNC, VSYNC separate
Horizontal frequency:
64kHz
Vertical frequency:
60Hz
Resolution SXGA:
1280x1024
Pixel frequency:
125MHz – when using a TFT, ensure the monitor is
cablable of 125Mhz pixel frequency (i.e. TFT’s with 80Hz
image frequency).
!
©
1996-2007 Vision Components GmbH Ettlingen, Germany
VC20XX_HW.pdf
