VC20XX Operating Manual
7
For the exact setting of the configuration, refer to the description of the configuration program in the
software documentation.
3.1.3
C6SEN205
This board takes the picture. It is used in the VC2068 and VC2068/E
The CCD sensor ICX205AL (B/W) is used. The board controls the CCD sensor and processes the
analog signal.
The progressive scan type CCD sensor used is ideally suited for industrial machine vision tasks. In
contrast to the conventional technique it provides the following features:
•
1/2" sensor
•
higher resolution: 1280x1024 pixels
•
square pixel format, 4.65 µm
•
full-frame
shutter
•
can be triggered externally
•
sensor read out in full-frame mode (non-interlaced)
•
shutter speed down to
9 µsec
and up to 20 sec
•
13,75fps @ 1280x1024 or 2 x binning @ 27,5fps
•
CCD processors providing CDS, programmable gain and offset, auto black level
compensation and 10 bit AD-conversion
The diverse features of this board (high-speed and low-speed shutter, external trigger, etc.) are
configured via software.
For the exact setting of the configuration, refer to the description of the configuration program in the
software documentation.
3.1.4
C6SEN311
This board takes the picture. It is used in the VC2048/E
The CCD sensor KAI0330D (B/W) is used. The board controls the CCD sensor and processes the
analog signal.
The progressive scan type CCD sensor used is ideally suited for industrial machine vision tasks. In
contrast to the conventional technique it provides the following features:
•
1/2" sensor
•
resolution: 640x480 pixels
•
square pixel format, 9(H) x 9(V) µm
•
full-frame
shutter
•
can be triggered externally
•
sensor read out in full-frame mode (non-interlaced)
•
shutter speed down to 18,36,72, µsec then steps of 36 microseconds up to 20 sec
•
112fps @ 640x480 !!!
•
CCD processors providing CDS, programmable gain and offset, auto black level
compensation and 10 bit AD-conversion
©
1996-2007 Vision Components GmbH Ettlingen, Germany
VC20XX_HW.pdf
