![background image](http://html.mh-extra.com/html/vbrick/9000-series/9000-series_admin-manual_857502180.webp)
172
© 2015 VBrick Systems, Inc.
Network CoT to LDS
In this method Cursor on Target (CoT) metadata is provided to the encoder via IP packets. It
is then converted to LDS per MISB EG 0805, MISB Standard 0601.3, and VBrick extensions,
and is embedded in the transport stream as KLV metadata per MISB Standard 0604 Section
6.2.
To configure Network CoT to LDS:
1. Configure a CoT data source to send CoT data to an IP port on the encoder.
2. Navigate to Encoder Configuration > Video.
a. Set
KLV
to
Network CoT to LDS
.
b. Set KLV Port to the IP port used for CoT data reception (default = 7777).
3. Navigate to Encoder Configuration > Streams.
a. Set Transport Type to
MPEG2TS
.
b. Check
Enable KLV
.
c. Configure other advanced settings as necessary.
MISB Timestamps
Regardless of what other KLV options you select, an option exists to insert MISB timestamps
into the video stream per MISB Standard 0604 Section 4.2.2. To enable this option go to
Encoder Configuration > Streams > Transport Stream Settings and check
Enable MISB
Timestamp
.
Содержание 9000 Series
