VBrick 9000 Series, Руководство по началу работы

Страница: 46 / 80

36 © 2012 VBrick Systems, Inc.
Login Page
Figure 13. Login Page

To login to VBAdmin:
1. Enter the IP address of the H.264 appliance in the address bar.
2. When the login page is displayed, login to VBAdmin with a valid user name and
password (case-sensitive), and then click the
Log In
button. The default user name and
password is
admin
and
admin
. It is highly recommended that you use the
Maintenance
pages in VBAdmin to change the user name and password. The user name and password
cannot exceed 20 characters. It may include any combination of alphanumeric characters
and only the following special characters:
~ ! # $ ^ * + & [ ] { } | < >
Table 18. Default Passwords and Privileges
Home Page
The first time you launch VBAdmin you will need to page down and accept the End User
License Agreement before you can login. A successful login will then display the "Welcome
to VBAdmin" page shown below. This is the "home" page; it provides system information
and the colored LEDs in the middle of the page give you a quick snapshot of the health and
status of the appliance.
User Level Default User Name Default Password Privileges
Administrator admin admin Read, diagnostics, edit, change
passwords.
Operator operator operator Read, diagnostics, edit.
Diagnostics diagnostics diagnostics Read, diagnostics.
Public public public Read.