VBrick 8000-0188, Быстрый старт

Страница: 44 / 67

Software Upgrade
Multi-Format STB Quick Start 39
3. Open the VEMS Mystro client interface and create a schedule, for example a
Rebroadcast
Content
.
4. Set the schedule for
Now
with a
Duration
of 1 minute.
When selecting destination output
devices, be sure to select all of the STBs you will be upgrading.
5. After the schedule runs the VEMS
Upgrade Server Page URL
will be written to each STB.
If the current
Upgrade Server Page URL
value has changed, you will see the following
message. This is normal behavior and no user action is required.
6. After the reboot, if a firmware upgrade is required, you can choose to run the upgrade or
not run the upgrade. If you run the upgrade, the STB will reboot, load new firmware, and
you are done. If you do nothing, the upgrade will automatically begin after five minutes.
If a STB needs to upgrade but the firmware image file is not on the server, the failure page
below is displayed. This page will display every time the STB logs into VEMS, including after
a schedule runs. (See Cancelling the Upgrade below to disable this functionality.)
Cancelling the Upgrade
If you choose to cancel an upgrade by clicking on one of the images above, the cancellation is
only temporary and you will see the same image prompt every time the STB reboots. If you
have trouble upgrading or do not want the STB checking for an upgrade at startup, you can
cancel upgrade checking permanently.