Sort Channels
- The channels are automatically
sorted according to your broadcaster’s (LCN)
automatic channel sorting number, where
available.
Broadcasters that do not provide LCN data the
channels will be sorted according to their
discovery.
Order
- You can change the channel order by
pressing the up or down arrows or by pressing on
the cycle icon and selecting the channel location
from the drop down menu
LCN
- Channel number is provided automatically
by the broadcaster (LCN) where available, When
LCN is not available the channel will receive
channel number higher than 1000, you can
change the channel number to a more friendly
number
Language
- There is no need to change this
settings, However you can narrow down the
streamed data by selecting specific language and
audio tracks, or enable Advanced settings to
stream Single Program Transport Stream (SPTS)
Press
Next
to continue
Step 4 - Recording Setup
You can set recording now or later, recording is
available on a self powered USB removable Hard
Disk Drive or USB Flash Drive; or to a Network
shared Windows folder or NAS (SMB/CIFS)
USB
- Plug your USB device to the VBox USB port
located on the rear panel and wait for few
seconds until the Current status refreshes and the
available storage is displayed, please make sure
that your device is formatted in the supported file
system and that it is self powered, or connect a
self powered USB hub to the VBox and connect
your device to the hub
