Installation Guide
Setting up
1. Make sure that UPnP is enabled on your
network router (In most routers this feature is
enabled by default)
2. Connect the VBox to your DVB-T/T2 Antenna
3. If you would like to record, connect a USB Hard
Drive or USB Flash Drive, you can setup recording
to a network storage at a later stage
4. Connect the network cable from the VBox to
your network router
5. Connect the VBox to the power adapter and
press the power button located at on the back
panel of the VBox
Software Installation
1. Make sure that the power LED is green
2. Download one of the VBox applications for
Tablet, iPad or Firefox
3. Make sure that your Tablet or PC is connected
to the same network as your VBox
4. You can quickly setup your VBox by using the
VBox apps for Tablet or with a PC
