Settings Menu
UNITS
Press ’■’ to change the displayed Velocity units. Then press ’■’ to confirm.
KMH, MPH or Knots
APPLICATION
Press ’■’ and then use the ‘◄’ and ‘►’ buttons to select between AUTOMOTIVE or MARINE
mode. Marine mode causes the box to display the Pitch, Roll and Slip angles as Trim, Heel and
Leeway Angles on the built in screen and also as channel names inside the logged file.
USB MODE
Press ’■’ and then use the ‘◄’ and ‘►’ buttons to select whether the USB port is assigned to
Serial data mode or Card reader mode.
CAN MODE
Press ’■’ and then the ‘◄’ and ‘►’ buttons to choose between the following modes:
VCI MODE*
To connect any external CAN modules to the input of the VBOX II
RACELOGIC MODULES MODE
To connect Racelogic CAN modules to the RLVBOX II (input or output)
LOG
OPTIONS
Press ’■’ to enter the Log Options Menu.
In this menu the Logging Mode and Log rate can be set.
SERIAL RATE
Press ’■’ and then use the ‘◄’ and ‘►’ buttons to select a serial data rate. The maximum serial
rate is equal to the Log rate.
GPS
Press ’■’ to enter the GPS configuration Menu. The Kalman Filter, Dynamic Mode and DGPS
mode is configured within this menu.
TIME OFFSET
Press’ the ‘◄’ and ‘►’ buttons to set an Time offset in order to align the VBOX time to the users
Local time.
BACK
Press ’■’ to go back to the Main menu.
4
