
Page 8 / 10
160826
12. Click fig.8 “Password” to set
a password for bluetooth
device so that others need
password to connect this
lamp.
Fig. 12
Set password for light
Functions
Change image
Rename light
Password
Restore factory defaults
9:41 AM
100%
Setting
Back
12. 1 The password must be 4
to 6 alpha-numberic
characters. Enter new
password and verify it
then press “Save”.
13. Click fig.8 “Restore factory
defaults” to restore your
settings (only the light name
and password) to the
original conditions.
13.1 Keep pressing the “reset”
button on the light for 5
seconds, the light will flash
three times. Then
press “Back” button.
Note: The photo’s settings
can’t be restored by
using this function.
Note: 1. Manual control and App control
independently.
2. The function which is executed is the lastest
settings.
3. After a power cut or power outage, the
function of the light will revert back to the
actual settings of the switches on the fixture.
App settings will also revert back to the factory
default.
4. For achieving the best performance,make
sure the wall switch is in “ON” state (daytime
and nighttime).
9:41 AM
100%
Enter new password
Verify password
(Must be 4 to 6 alpha-numberic characters)
Back
Save
Fig. 13
Fig. 13-1
Fig. 12-1
Restore factory defaults
Functions
Change image
Rename light
Password
Restore factory defaults
9:41 AM
100%
Setting
Back
Restore factory defaults
Please press the reset button on the bottom
of sensor head for 5 seconds.
9:41 AM
100%
Back