●
To clean, turn off and wipe with a damp, non-abrasive cloth.
1) The light does not come on at all:
a) Make sure the wall switch and circuit breaker are on.
b) Make sure the wiring is correct.
2) Fuse blows or circuit trips when light is turned on.
a) Check for crossed wires, ensure wiring is correct.
CARE AND MAINTENANCE
TROUBLESHOOTING
If unable to fix any of the above issues, please consult a certified electrician.
180806
Page 3 of 3
Spare Parts List:
The following parts are available for re-order if damaged or missing. Call our toll free at 800-482-9235.
Assembly Kit
4861MM(1 SET) For T0429
4862MM(1 SET) For T0430
GG
FF
5
5. Attach the back plate to the
cross bar by inserting the
headless screws (CC), then
secure it with rubber pads
(GG) and ball nuts (FF).
CAUTION: With silicone
caulking compound, caulk
completely around where
the back plate meets with
the wall surface to prevent
water from seeping into the
outlet box.
6. Install a bulb (not included).
See relamping label at
socket area or packaging for
maximum allowed wattage.
6
Bulb Type A Max.60W
(not included)
7. Unscrew the set screws and
rubber pads form fixture.Attach
the cover to the main fixture by
aligning holes, secure it with two
rubber pads and two set screws.
Rubber Pad
Cover
set screw
7
GlassX4
9293C
ASSEMBLY INSTRUCTIONS (continued)
Turn on the power at fuse or circuit box.
Cross Bar
X1
Mounting Screw
X2
Headless Screw
X2
Wire Connector
X3
Lock Nut
X4
Ball Nut
X2
Rubber Pad
X2
EE
AA
BB
CC
DD
FF
GG
HH
Green Grounding
Screw X1
