4. How to Operate
Cord release
This vacuum cleaner is equipped with a convenient cord
storage feature. The power cord winds around the two
cord holders at the side of the unit. The bottom cord
holder has a quick release feature. Turn the cord hook
to the left or the right to remove the power cord (Fig.4/1)
Folding handle
With the handle in its folded position, rotate the handle
vertically upward until it clicks into place. To fold the
handle, rotate the handle release knob anti-clockwise
and rotate the handle down to its folded position
(Fig.4/2A&B).
On/off pedal
Plug the cord into the electrical outlet. Turn the
vacuum cleaner on by pressing the on/off switch
located on the lower right side of the cleaner (Fig.4/3).
The cleaner can be turned off by pressing the on/off
switch again.
How to Operate
Floor/carpet cleaning
To adjust the angle of the vacuum cleaner body, push the
release pedal on the lower left side of the cleaner (Fig.4/4).
Move the handle to the desired position. (A) for upright
position, (B) for normal operation and (C) to clean
under furniture (Fig.4/5).
Adjustment for floor types
The front of the vacuum cleaner has a brushbart
height adjust (Fig.4/6) that raises and lowers the
brushbar to suit the type of carpet. With the cleaner
NOT connected to the electrical outlet, set the
adjustment to the lowest setting for maximum
cleaning. If the cleaner is difficult to move, push the
knob to the next highest setting until the vacuum is
comfortable to push. The brushbar must reach the
carpet for effective cleaning.
Fig.4/4
Fig.4/5
Fig.4/6
B
O n / o f f
switch
Press
here
Fig.4/2
A
B
A
C
Fig.4/1
Fig.4/3
5
CAUTION:
The brushbar continues to rotate while the
hose is removed or in use, and at all times while the
vacuum cleaner is on. Keep hair, loose clothing, fingers
and all parts of the body away from the brush area while
the vacuum cleaner is on. The vacuum cleaner must be
in the upright position to lift the rotating brushbar off the
carpet when cleaning above the floor. Vax recommend
that the brushbar height adjust is turned to its highest
position when using the tools.
X-003 D2.1.qxd 9/9/05 11:13 AM Page 5
