7
Vax Careline
0870 606 1248
clearing blockages / storage
7. Cleaning Blockages
WARNING:
To reduce the risk of electric shock, the
power cord must be disconnected before
performing maintenance/troubleshooting checks.
1.
Turn the vacuum cleaner off and unplug from the
electrical outlet.
2.
The flexible hose can be disconnected from the
vacuum cleaner by turning the hose to the left and
pulling away from the machine. Remove any
blockages found then reconnect the hose securely.
Clearing debris from the TurboTool
(Model: VZL-7022P only)
Clearing debris from the TurboTool
Switch the vacuum cleaner off and disconnect the power
plug from the electrical outlet.
Press the latches on both sides of the tool and remove the
bottom plate (Fig.7/1).
Remove any blockage (Fig.7/2).
To re-assemble, and replace the bottom plate, insert the
four tabs on edge of bottom plate into slots on front of
tool. Pivot bottom plate down and snap closed (Fig.7/3).
Removing debris from the TurboBrush
(VZL-7022P only)
The brushbar will stop rotating if it is blocked during
operation by vacuuming up foreign objects, or is strands of
carpet are wrapped around it.
Switch the vacuum cleaner off and disconnect the power
plug from the electrical outlet.
Lay the TurboBrush floor head on a flat surface and turn
over to expose the brushbar. Using a pair of scissors, cut
through any threads or hairs caught by the brushbar that
have wrapped around the guides (Fig.7/4).
!
Fig.7/4
!
Fig.7/1
Fig.7/2
Fig.7/3
Vax VZL-7022(HF).qxd:Vax VZL-7022HF User Guide 10/4/08 14:50 Page 7
