![background image](http://html1.mh-extra.com/html/vax/vzl-6013/vzl-6013_instruction-manual_4252407004.webp)
www.vax.co.uk
4
assembly
3. How to assemble
Attach Handle
Grasp orange tie wrap and pull until the black plug comes
out of the handle cavity (Fig.3/1).
Hold plug with one hand; upper handle with the other
hand. Push plug into upper handle, aligning with opposite
end of plug and push firmly until you hear a snap or click
(Fig.3/2). After ends are connected, pull on plug to make
sure it is securely attached.
Align the groove on the back of the upper handle with
the small projection on the back of the handle housing.
Push upper handle down until you hear a click (Fig.3/3).
Press button at handle base and push handle all the way
down (Fig.3/4).
Adjusting Handle
For convenience in storing or carrying your cleaner, the
handle is designed to retract into the body of the cleaner.
Lower the handle by depressing the button located at the
handle base and pushing the handle down. Raise the
handle by depressing the button and pulling the handle
upward, locking it into the desired position (Fig.3/5).
Transporting Cleaner
To move your cleaner from room to room, put handle in
upright position, tilt cleaner back on rear wheels and push
forward (Fig.3/6).
Fig.3/1
Fig.3/2
Fig.3/3
Fig.3/4
Fig.3/5
Fig.3/6