Using your machine
Using your machine
Using the hose and SpinScrub tool
Using the upholstery wash tool
CAUTION:
Test for colourfastness - Wet a white absorbent cloth with the solution. In a small hidden area of your carpet/
rugs/upholstery gently rub with the dampened cloth. Wait ten minutes and check for colour removal or bleed with a white
paper towel or cloth. If your carpet has more than one colour, check all colours.
NOTE:
The carpet washer should be in the upright position when using the upholstery tool; de-activating the SpinScrub
brushes and brushbar.
Pour required amount of
carpet cleaning solution
into the clean water/
solution tank.
Pour required amount of
carpet cleaning solution
into the clean water/
solution tank.
Press trigger on hose to
release solution/water.
Push hose end and
hose solution connector
into hose and solution
connection port.
Push hose end and
hose solution connector
into hose and solution
connection port.
Fill the clean water/
solution tank with warm
water (max 40’C).
Fill the clean water/
solution tank with warm
water (max 40’C).
Squeeze trigger on the
forward stroke, release
trigger on backward
stroke to recover
solution/water.
Slide SpinScrub tool over tab at end of hose until it
clicks into place.
Pull down accessory hose
connector cover.
Pull down accessory hose
connector cover.
Turn wash/rinse dial
to ‘wash’.
Turn wash/rinse dial
to ‘wash’.
Plug into mains,
press the On/Off button
to switch on.
Plug into mains,
press the On/Off button
to switch on.
Slide upholstery tool over tab at end of hose until it
clicks into place.
TIP
Use the carpet washer
or hose to pick up spills
before washing and
cleaning the area.
Содержание VX65
Страница 10: ...Notes Notes...