Assembling your vacuum cleaner
Keep you Vax like new
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Getting started
Getting to know your machine
CAUTION:
Always switch off the vacuum cleaner before connecting or disconnecting the hose/attachments,
or removing and emptying the dirt container.
IMPORTANT:
The condition of the filters affects the performance of your machine. Please check, clean and replace
filters periodically (depending on the level of use). For full cleaning instructions, see “Cleaning the pre-motor filter”
and “Cleaning the post-motor filter”.
IMPORTANT:
Do not use the vacuum cleaner with blocked filters and without all of the filters in place.
Name
Vax Black Edition
Voltage
220-240V
~
50Hz
Wattage
2000W
Capacity
2.2 Litres
Cord length
5m
Weight
4.1kg
Filter pack
VWCF*
Filters
Pre-motor filter (washable)
Post motor filter – HEPA Filter (not washable, tap to clean)
Technical Specification
Subject to technical change without notice.
*
To purchase consumables and accessories, please visit
vax.com.au
Double
Insulated
This product
meets applicable
regulatory
requirements
Indoor
Use
Read
Instructions
Insert the end of the hose
into the unit. Ensure the
hose has clicked into
place.
Slot the metal telescopic
extension tube and hose
handle together. All
accessories can be fitted
to the end of the metal
telescopic extension tube
and hose handle.
Fully unwind the power
cord. A yellow mark on the
cord indicates the
recommended cord length.
Do not exceed the cord
beyond the yellow mark.
Plug in and switch the
unit on by pressing the
power button.
Carry handle
Cyclone separator and shroud
Hose connector
On/off button
Floor head parking slot
Variable power dial
Dirt container
Dirt bin release button
Cord rewind button
Wheel
