Using your machine
WARNING:
Always switch off and unplug the vacuum cleaner from the electrical socket before assembling,
opening or emptying the dirt container, or before connecting/disconnecting the attachments.
IMPORTANT:
The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the
thermostat will automatically turn the unit off.
NOTE:
Empty the dirt container when the MAX mark is reached.
IMPORTANT:
Filters need to be cleaned
every time you empty the dirt container
for best cleaning results.
Do not use your vacuum cleaner with blocked filters and without ALL the filters in place.
Emptying and cleaning the dirt container
Taking care of your machine
Remove dirt container
by pushing down the dirt
container release button
and lifting the dirt
container.
Hold the dirt container
and locate the dirt
release button on the rear
of the dirt container.
Hold dirt container over a
bin and press dirt release
button to open, allowing dirt
to fall out.
How to use
Adjust the power by
rotating the dial for
different surfaces
as required.
Hard Floors
Carpets
For use on carpets click
rocker switch forward. For
use on hard floors click
rocker switch back.
Storage
Cable rewind button is
located at the rear of the
machine. After unplugging
press the cable rewind until
the cord is fully retracted.
For convenience there is a parking slot located at the rear
of the vacuum cleaner where the floor head and tubes
can be attached for storage and carrying.
