background image

General Safety Information

Vax Careline:   

AU: 1300 361 505 

NZ: 0800 800 900

vax.com.au

3

This machine is intended for household use only, and NOT 

for commercial or industrial use. 

 

When using the vacuum cleaner, basic safety precautions should 

always be observed, including the following: 

1. 

 Do not leave the multifunction machine unattended when 

plugged in. Unplug it from the socket when not in use.

2.  To prevent electric shock do not use outdoors.
3.  Not to be used as a toy.
4.   Children should be supervised to ensure that they do not play 

with the appliance.

5.   This appliance is not intended for use by persons (including 

children) with reduced physical, sensory or mental capabilities, 

or lack of experience and knowledge, unless they have been given 

supervision or instruction concerning the use of the appliance 

by a person responsible for their safety.

6.   Use only as described in this manual. Use only Vax 

recommended attachments.

7.   Do not use the vacuum cleaner if it has been dropped, 

damaged, left outdoors or dropped into water. Do not use the 

vacuum cleaner with a damaged cord or plug. If the supply cord 

is damaged, it must be replaced by the manufacturer or a 

recommended service agent to avoid a hazard.

8.   Do not handle the plug or multifunction machine with wet hands. 

Do not use outdoors.

9.   Do not pull or carry by cord. Do not use cord as a handle, close 

a door on the cord or pull cord around sharp edges or corners. 

Do not run the multifunction machine over the cord. Keep the 

cord away from heated surfaces.

10.   Do not put any objects into openings or operate with openings 

blocked. Keep them free of anything that might reduce airflow.

11.   Keep hair, loose clothing, fingers and all parts of body away 

from openings and moving parts.

12.   Do not pick up hot coals, cigarette butts, ash, matches or any 

hot, smoking or burning objects.

13.   Do not use the carpet washing function without the solution 

tank and dirty water tank in place.

14.  Do not use the vacuum without the dust bag in place.
15.  Turn off all controls before unplugging.
16.   Do not vacuum up harmful or toxic material (chlorine, bleach, 

ammonia, drain cleaner etc.).

17.   Do not vacuum up hard or sharp objects such as glass, nails, 

screws, coins, etc.

18.   Do not vacuum baking soda or any other powder-based carpet 

refresher or deodoriser.

19.   Do not vacuum plaster dust, concrete dust or any other building 

or vitreous material.

20.   Use only SAA 10 amp extension cords. Non approved cords 

may over heat. Care should be taken to arrange the cord so that 

the cord cannot be tripped over.

21.  Store the multifunction machine in a cool, dry area.
22.   To prevent dirty water from running into motor, do not hold the 

appliance upside-down or lay on its side. Use appliance in 

normal vacuuming/carpet washing position.

23.  Take extra care when cleaning on stairs.
24.   Turn off the on/off switch before unplugging the multifunction 

machine.

25.  Do not carry appliance while motor is running.
26.   We recommend the use of a residual current device with 

a residual current rating of 30mA or less.

 WARNING:

 Always switch off and unplug the multifunction 

machine from the electrical outlet before assembling, 

opening, emptying the dirt container, before connecting/

disconnecting the attachments, or carrying out maintenance 

or troubleshooting checks.

NOTE:

 Carpets should be dry vacuumed thoroughly 

before washing.

 IMPORTANT:

 If the hose or tools are blocked, switch off the 

multifunction cleaner and remove the blockage(s) before 

re-starting your machine. See maintenance.

 IMPORTANT:

 Cleaning filters and replacing them regularly 

maintains vacuum performance. Vax recommends that your 

filters should be checked, cleaned and replaced periodically. 

If your filters are washable make sure they are completely 

dry before inserting back into the multifunction machine.

 IMPORTANT:

 The motor is equipped with a thermal cut-out. 

If for any reason the unit should overheat, the thermostat 

will automatically turn the unit off. Should this occur, unplug 

the vacuum cleaner from the electrical outlet and turn off 

the switch. Remove dirt container and empty. Clean filters. 

Allow the unit to cool for approximately one (1) hour. 

To re-start, plug into an electrical outlet and switch back on.

DAMAGE TO THE VACUUM CLEANER CAUSED AS A 

DIRECT RESULT OF NOT ADHERING TO THE GENERAL 

SAFETY INFORMATION AND THE INSTRUCTIONS IN 

THIS USER GUIDE INVALIDATES THE WARRANTY.

PLEASE KEEP THESE INSTRUCTIONS FOR FURTHER USE.

Содержание VX5



















Отзывы: