Vax VX5, Руководство пользователя

Страница: 6 / 18

Vax Careline:
AU: 1300 361 505
NZ: 0800 800 900
vax.com.au
5
Operation
Carpet washing
WARNING: Do not use the multifunction cleaner as a dry vacuum when set up in carpet washing mode.
Before you begin carpet washing:
1. Dry vacuum your carpet thoroughly.
2. Test for colourfastness – wet a white absorbent cloth with the solution. In a small, hidden
area gently rub the surface with the dampened cloth. Wait ten minutes and check for colour removal or bleed
with white paper towel or cloth. If surface has more than one colour, check all colours.
NOTE: When cleaning entire floor, move furniture out of area to be cleaned. For furniture too heavy to move,
place aluminium foil or wax paper under legs. This will prevent wood finishes from staining carpet. Pin up
furniture skirts or curtains.
Helpful hints for cleaning carpet:
1. Only use Vax recommended cleaning solution with this machine.
2. Do not over saturate carpet with cleaning solution while using the machine.
3. For heavy soiled areas, additional applications may be necessary.
4. Allow plenty of time for carpet to dry thoroughly.
5. Try not to walk on carpet until it is completely dry.
6. After carpet is thoroughly dry, vacuum the carpet using your multifunction cleaner in dry mode.
7. Before cleaning, determine where to start and end, making sure not to walk over previously cleaned areas.
8. Thoroughly clean the dirty water tank and clean water tank after use with warm water (max 40°c).