8
9
1
2
3
Operating the vacuum cleaner
Make sure the vacuum cleaner has
been switched off and is in an
upright position. Remove the lower
hose by twisting clockwise and
pulling away from the base of the
cleaner.
Remove the hose from the tool
Holder.
Slide the hose into the lower hose
with the tab facing upwards twist
together to secure.
Cleaning upholstery
4
5
6
Operating the vacuum cleaner
For hard to reach area’s when
additional hose length is required,
use the extension wand. It fits over
the end of the hose handle.
Choose the accessory that suits
your need or use the hose alone.
To fit the attachments push them
firmly on to the end of the extension
wand or hose handle. To remove
the tool, twist and pull apart gently.
When moving from one room to
another use the carrying handle at
the rear of the vacuum cleaner.
r VS-19TS Swift manual op.qxd 7/15/04 8:00 PM Page 4
