4
5
4
5
6
Putting your vacuum cleaner together
Align the holes in the tool holder,
with the holes on top of the body.
Use two of the screws supplied to
secure the tool holder in place.
Do not over tighten.
With the hose clip on the handle
facing you place it onto the top of
the body of the cleaner.
7
8
9
Putting your vacuum cleaner together
Push down firmly and line up the
screw hole on the rear of the handle.
Use one of the screws supplied to
secure the handle on the body.
Insert the small end of the main
hose into the tool holder on the
right hand side.
r VS-19TS Swift manual op.qxd 7/15/04 7:59 PM Page 2
