Vax VRS24B, Руководство пользователя

Страница: 5 / 12

On/off
switch
Operation
vax.co.uk
5
Operating the appliance
press
here
Turn the vacuum cleaner
on by pressing the on/off
switch located on the
lower right side of the
cleaner. The cleaner can
be turned off by pressing
the on/off switch again. To adjust the angle of the
vacuum cleaner body,
push the recline pedal
on the lower left side of
the cleaner. Move the handle to the
desired position. (A) for
upright position, (B) for
normal operation and (C)
to clean under furniture. Secure the top handle to
the back panel by inserting
the two long screws.
A
B
C
The front of the vacuum cleaner has a brushbar height adjuster that raises and
lowers the brushbar to suit the type of carpet. With the cleaner NOT connected
to the electrical outlet, and when the vacuum is in the upright position set the
adjustment to the lowest setting for maximum cleaning. If the cleaner is difficult
to move, push the knob to the next highest setting until the vacuum is comfortable
to push. The brushbar must reach the carpet for effective cleaning.
IMPORTANT: When the vacuum cleaner is stood in the upright position or when
using the hose and tools, the brushbar height adjuster must be set to the highest
position.
WARNING: To avoid injury, keep loose clothing, hair, fingers and all other parts of
the body away from any moving part (such as the brushbar). Turn off the switch
and unplug the cleaner before adjusting the cleaner for the carpet height.
Using accessories
The accessories can be used with or without the extension tube. To attach,
remove the hose from the machine and push the desired accessory onto the end.
Crevice Tool
Use the crevice tool for radiators, crevices, corners, skirting boards and
between cushions.
TurboTool (Some models only)
For pet hair, stairs and upholstery. The TurboTool should be pulled backwards
for optimum cleaning.