What to do if it goes wrong
•
Lance and nozzle not attached. The lance and nozzle must be
attached to the trigger handle for pressurised water to be produced.
•
Hose may be blocked or kinked, check for leaks in the hose and clear
any blockages.
•
Straighten out the hose to ensure no kinks and check the hose pipe
connections to the water supply and water inlet.
•
Lance and nozzle may be blocked, clear any blockages and clean
with nozzle cleaning tool. Go to ‘Lets talk technical’.
•
Remove and clean the water inlet filter. Go to ‘Taking care of
your machine’.
•
Check the water flow rate to your water supply.
Why won’t my pressure
washer/steamer reach
operating pressure?
•
Tank maybe empty. Turn off, allow to cool for 10 minutes, refill and
make sure that water is being drawn through the steamer water
supply tube from the tank without air bubbles. If there is a bubble air
locking the pipe then squeeze the pipe towards the tank to remove it.
•
Check the assembly of the water supply tube into the water tank. Go
to ‘Using your
machine
’.
•
The water may not yet be at temperature, allow heat up time. Cold
water may take longer to heat.
•
Check the On/Off switch has been set to the
‘II’
position.
Go to ‘Using your
machine
’.
•
Remove safety lock and press trigger on steamer gun.
•
Steam path is blocked. Go to ‘Removing a blockage from the
lance and nozzle’.
Why wont my pressure
washer/steamer produce
any steam?
Содержание VPW2S PowerPlus STEAM
Страница 23: ...Notes...