15
Vax Commercial Careline
0870 1129 145
cleaning
Dry hands and plug carpet cleaner into a suitable power
outlet (Fig 5/20)
Turn carpet cleaner on. If necessary, refer to “Before using
tool” section to remove air from system.
Gently press the tool onto the fabric. Press the trigger and
slowly pull the nozzle over the fabric.
Overlap strokes by 1/2 inch to help prevent streaking.
Make additional strokes without pressing the trigger to
remove more moisture.
To clean in corners or creases, lift the tool one-half inch
from the fabric and press the solution trigger.
Vacuum up the solution with the tool without pressing the
trigger.
For heavily soiled areas, it may be necessary to repeat the
cleaning process. Make criss-crossing strokes to the
original pattern; overlap each pass (Fig 5/21).
NOTE:
Make no more than 2 passes with the solution over
any one area to prevent over-wetting and damage to
fabric.
If additional cleaning is necessary, wait until the
upholstery is completely dry before using the tool again.
Empty recovery tank when the motor sound becomes
higher pitched and there is a loss in suction (see
“Automatic shut-off”, page 7).
When finished cleaning, follow “After cleaning”
instructions on page 10 and “After using tool” instructions
on page 13.
Fig.5/20
Fig.5/21
VCW-04 Commercial Cleaner User Guide v5.qxd:UG 27/1/09 16:52 Page 15
