![background image](http://html1.mh-extra.com/html/vax/vcw-01/vcw-01_instruction-manual_4238147008.webp)
Vax
VCW-01
8
accessories
7. Accessories
For cleaning upholstery and stairs
Put carpet washer in its upright position, then turn off
(Fig 7/1).
Remove the dirty water tank door from the top of the
dirty water tank (Fig 7/2).
Insert the up-holstery/stair hose adaptor into the
opening on top of the dirty water tank (Fig 7/3).
Connect the hose solution tube into the fitting on the
lower left side of handle facing carpet washer (Fig 7/4).
Upholstery / stair attachment
Step on power on/off pedal to turn cleaner on.
Connect desired attachment by pressing tool onto the end
of the attachment hose until the locking button snaps into
the hole (Fig 7/5).
WARNING: Keep spray pointed away from face.
Failure to do so may result in personal injury.
NOTE: Do not oversaturate the upholstery.
IMPORTANT: For best cleaning results use
steady, moderate, forward and backward
motion. Make sure upholstery is dry before use.
NOTE: If the dirty water tank door is not
replaced, there will be no suction through the
nozzle and the unit will not operate properly.
Fig.7/1
Fig.7/4
Fig.7/5
Fig.7/2
Fig.7/3
Back View
!
!
!
!
Vax VCW-01 User Guide.qxd 21/12/07 09:20 Page 8