Fig.8/3
3
10
4
3
9
2
1
14
12
13
10
11
Fig.1/1
1 Water pump button (green)
2 Power button (red)
3 Carry handle
4 Power cord
5 Container release clips
6 Casters
7 Suction hose connection port
8 Solution tube port
9 Exhaust filter
10 Hose
11 Solution tube
12 Suction hose connector
13 Solution tube to machine connector
14 Solution tube to wash head/upholstery tool connector
15 2 x stainless steel extension tubes
16 Fibreflow carpet wash head
17 Upholstery wash tool
18 Vax Carpet Cleaner Solution
19 Combination floor head (for dry vacuuming)
20 2 x paper dustbags
21 Filter assembly
22 Crevice tool
23 Dusting brush
24 Upholstery tool
AA
A
A N T I
A LL ER G E N
A D D I T I V E
5
6
7
8
16
17
18
20
15
21
22
19
24
23
2. Parts Overview
9. Dust Bag and Filters:
Removal and Replacement
IMPORTANT:
Always unplug the
machine from the electrical output
before removing the dust bag.
IMPORTANT:
Do NOT use the vacuum
cleaner without ALL of the filters in
place.
1. Turn off the vacuum cleaner and unplug it
from the mains. Remove the hose. Unclip
the retainer clips on either side of the
vacuum cleaner and lift off to gain access
to the dust bag compartment (Fig.9/1).
Washing Upholstery
1. Detach wash head from the solution tube
and extension tubes.
2. Pull the extension tube out of the handle
of the hose.
3. Attach the upholstery wash tool directly
onto the handle of the hose (Fig.8/3) and
wrap the excess solution tube around as
necessary.
Fig.9/1
Fig.9/2
Fig.9/3
4. To start water and solution flow, push the
collar on the wash tool forwards.
2. Lift out the full dust bag (Fig.9/2).
3. Dispose of the full dust bag and insert
a new dust bag back into the vacuum
cleaner aligning the front of the dust bag
with the inlet slots (Fig.9/3).
5. When you see water swirling in the washing
tool you are ready to start washing.
6. Pull the washing tool backwards. You
are now washing the upholstery. Cover a
small area at a time. Don’t push the tool
backwards and forwards as this may
stretch the fabric.
7. Stop the washing solution flowing. To stop
the flow, pull the black collar on the wash
tool backward (Fig.8/5).
8. Move to next area and repeat steps 4 to 7.
Fig.8/4
Fig.8/5
