---
Maintenance
(Keep your Vax as good as new)
vax.co.uk
9
Removing blockages
WARNING:
To reduce the risk of electric shock, turn the vacuum cleaner off and unplug from the electrical
outlet before performing maintenance/troubleshooting checks. Disconnect the hose from the vacuum cleaner
and remove any blockages found then reconnect the hose securely.
Removing blockages from the brushbar
!
!
!
!
Removing blockages from the TurboTool
(some models only)
Turn the TurboTool over and slide
off the locking ring.
Detach lower housing and remove
blockage.
To re-assemble the TurboTool,
ensure that the tabs are engaged
and pivot the lower housing closed.
Slip the locking ring over the neck
of the TurboTool and into the
groove to finish.
Locking
ring
Tabs
Unscrew the four
screws on the base of
unit.
Remove floor nozzle
cover.
Lift brushbar.
Remove the belt from
the end of the
brushbar.
U87-VU-C UG_User guide 05/03/2013 17:33 Page 9