www.vax.co.uk
4
assembly
3. How to Assemble
IMPORTANT: Always unplug the vacuum cleaner
from the electrical outlet before assembling or
removing the accessories.
Tool required:
Phillips screwdriver
1. Slide the back panel onto the base (Fig.3/1). Connect
lower hose to base by sliding it over the connector and
twisting to secure.
2. To secure, insert the two (2) screws into the front of the
back panel (Fig.3/2).
3. Slide the end of the hose onto the back panel inlet. Turn
anti-clockwise to secure (Fig.3/3).
4. Align the carry handle holes with the holes on the back
panel. Slide the handle forward. Insert two (2) screws into
the holes and tighten until secure (Fig.3/4).
5. Place the upper handle onto the upright back panel
(Fig.3/5).
6. Attach the TurboTool clip into the TurboTool caddy
(Fig.3/6).
7. Place the TurboTool caddy onto the front of the vacuum
lower handle (Fig.3/7).
Fig.3/1
Fig.3/5
Fig.3/6
Fig.3/7
Fig.3/2
Fig.3/3
Fig.3/4
!
