www.vax.co.uk
4
assembly
3. How to Assemble
IMPORTANT: Always unplug the vacuum cleaner
from the electrical outlet before assembling or
removing the accessories.
Tool required:
Phillips screwdriver
1.
Place the base of the cleaner so it is facing away from
you. Position the body so that the lower hose is on your
right hand side. Push the body down into place.
To secure the body in place insert two screws supplied into
the back of the cleaner, through the hole located above
the hose guide (Fig.3/1).
2.
With the cord clip on the handle facing you place it onto
the top of the body of the cleaner (Fig.3/2).
3.
Push down firmly and line up the hole on the rear of the
handle. Insert lock piece into hole and screw into place
with the long screw (Fig.3/3).
4.
Using the handle attach the main hose into the left
hand side of the cleaner. Press down firmly to secure in
place. The main hose can then be secured in the top and
side of the hose holder.
Push the dirt container lid firmly on top of the dirt
container and place it onto the cleaner. The canister lid will
snap into place in the body of the cleaner.
Attach the tools to the tool holder. The dusting brush fits
over a post at the back of the vacuum cleaner.
The crevice tool fits into the extension wand. The
extension wand is located on the right hand side (Fig.3/4).
5.
Store the TurboTool in the caddy on the handle
(U91-P3P only) (Fig.3/5).
!
Phillips screwdriver required
Fig.3/1
Fig.3/2
Fig.3/3
Fig.3/5
Fig.3/4
Vax U91-P3 User Guide.qxd:U91-P3 User Guide 15/12/08 09:34 Page 4
