background image

Using your machine

Using your machine

Using the hose with the main body attached

Using the hose with the main body detached

CAUTION: 

Constant use of the boost button will reduce the battery running time.

Always switch off the vacuum cleaner before connecting or disconnecting any tools.
Do not use the vacuum with base and main body attached to clean stairs.

CAUTION: 

When cleaning stairs to prevent the vacuum cleaner falling, always use with the main body detached from the 

base. Hold or place it securely on or at the bottom of the stairs during use. Do not place the vacuum cleaner on furniture.

Remove the hose from the 

side of the vacuum cleaner 

by pressing the hose end 

clip and pulling hose  

out of the hose entry point.

Remove the hose from the 

side of the vacuum cleaner 

by pressing the hose end 

clip and pulling hose 

out of the hose entry point.

Choose an accessory.  

Attach tool to the end of  

the extension tube.

Choose an accessory.  

Attach tool to the end of  

the extension tube.

Press handle release clip 

and lift to remove handle.

Press handle release 

clip and lift to 

remove handle.

When using the hose make 

sure the vacuum is secure 

by holding the handle on top 

of the dirt container.

Press the main body 

release button. Lift and 

remove the main body 

from base of machine. 

Attach the hose to the 

handle, clipping the hose 

end clip over the indented 

ridge on the entry point.

Attach the hose to the 

handle, clipping the hose 

end clip over the indented 

ridge on the entry point.

Press the On/Off button 

to switch the vacuum 

cleaner on.

Put the base of the vacuum 

cleaner to one side. Carry 

the main body with the handle 

on top of the dirt container.

Press the Boost button 

for increased suction when 

using tool attachments.

Press the On/Off button 

to switch the vacuum 

cleaner on. 

Replace handle and clip 

hose end clip into the 

side of vacuum cleaner 

after use.

Press the Boost button 

for increased suction when 

using tool attachments.

Line up main body onto 

base of vacuum cleaner 

and push backwards until 

clicks into place, refit handle 

and hose after use.

TIP: 

Constant use of the boost button will reduce the battery run time.

Содержание U85-ACLG-B Air












Отзывы: