Let’s talk technical
Using a crosshead
screwdriver, remove
3 screws from the side
of the floorhead.
Pull to remove the
brushbar location plate.
Remove and dispose
of old belt.
Clean any debris from
spindle. Place new belt
onto spindle, lining up
teeth on belt over and
onto cog.
Changing the belt
Pull to remove the
end cap belt cover.
Removing blockages from the TurboTool*
Tabs
Slide the locking ring
to remove.
Lift and separate
the housing.
Using a pair of scissors,
remove any threads
or hair caught around
the brushbar.
Line up the tabs on front of
housing and push together
to refit. Slide locking ring
into groove to secure.
IMPORTANT:
Unplug and switch off vacuum cleaner before maintenance or troubleshooting checks