2.
Undo the hose from the back panel dirt tube.
Remove any obstruction (Fig.9/2).
3.
Undo the hose from the clear dirt passage
window and remove any obstruction (Fig.9/3).
4.
Remove the nozzle guard by removing the five
(5) screws. Look for any obstructions and
remove brushbar if necessary (Fig.9/4).
Clearing Blockages from the
TurboTool®
1.
Rotate the locking ring 180º and then turn the
TurboTool® over (Fig.9/5).
LOCKING RING
Fig.9/5
Fig.9/4
Fig.9/2
Fig.9/3
Light Bulb: Removal & Replacement/Clearing Blockages
2.
Pull the bulb out of the socket gently.
Do Not
twist the bulb. Gently push the replacement bulb
into the socket (Fig.8/2).
3.
Secure the headlight lens by replacing the two
(2) screws (Fig.8/3).
9. Clearing Blockages
WARNING
: To reduce the risk of injury from moving
parts, unplug before servicing.
1.
Check to see if dirt container is full. Empty and
clean the dirt container filter.
2.
Unwrap the hose from the caddy. Remove any
obstruction if visible in the end of the hose
(Fig.9/1).
Fig.9/1
10
Fig.8/1
Fig.8/2
Fig.8/3
Vax V-006 D5 BF 7/1/05 12:13 PM Page 10