manualshive.com logo in svg

Vax Turbo Force Ultra V-006U, Инструкция по эксплуатации, Страница: 9 / 16

Поделиться
Скачать
Vax Turbo Force Ultra V-006U Скачать руководство пользователя страница 9

2.  Lift the nozzle guard (Fig.7/2).

3.

Lift and remove the brushbar and dispose of the
belt (Fig.7/3).

To Replace the Belt or Brushbar

1.

Slide the belt onto the motorshaft (Fig.7/4). Then
slide the brushbar into the belt.

2.

Place the new belt in the area of the brushbar
without bristles (Fig.7/5).

3.

With the new belt in place, pull and slide the
brushbar into the nozzle, making sure that the
end caps are in the correct orientation (Fig.7/6A).
Rotate the brushbar manually to make sure the
belt is properly aligned (Fig.7/6).

4.

Re-attach the nozzle guard (Fig.7/7) 

5.

Replace all five (5) screws to secure the nozzle
guard (Fig.7/8).

8. Light Bulb: Removal &

Replacement 

(V-006/V-006B/V-006N only)
WARNING: 

To reduce the risk of injury from moving

parts, unplug before servicing.

Tool required

: Phillips screwdriver.

1.

Unplug the vacuum cleaner. Lean the cleaner
handle back and remove the two (2) screws
located on either side of the headlight lens
(Fig.8/1).

Fig.7/1

Fig.7/2

Fig.7/3

Fig.7/4

Fig.7/7

Fig.7/8

Fig.7/6

Rotating Brushbar & Filter: Removal & Replacement/Light Bulb Removal & Replacement

9

Fig.7/5

A

Vax V-006 D5 BF  7/1/05  12:13 PM  Page 9

Содержание Turbo Force Ultra V-006U

















Отзывы:

Нет отзывов